Product ID:BOSTIK 7074D ADHESIVE
MSDS Date:01/01/1985
FSC:8040
NIIN:00N000308
MSDS Number: BCFCX

USM CORP, BOSTIK DIV

BOSTON ST
MIDDLETON, MA 01949
US

Cage: GO832

USM CORP, BOSTIK DIV

MIDDLETON, MA 01949 US

Telephone: 508-777-0100

Cage: GO832

ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 66%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 3 - 15%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:IRRIT OF EYES/NOSE/THROAT, HDACHE, NAUSEA. HIGH
EXPOSURES: NARCOSIS.

First Aid:SKIN: WIPE OFF IMMED. WASH W/SOAP & WATER. FLUSH W/WATER.
EYE: IMMED FLUSH W/WATER AT LEAST 15 MIN. CALL MD. INH: REMOVE TO
FRESH AIR. CALL MD. GIVE ART RESP IF NECESSARY.

Flash Point:36F TOC
Lower Limits:1.2
Upper Limits:9.0
Extinguishing Media:FOAM, CO*2, DRY CHEM
Fire Fighting Procedures:USE AIR-SUPP BRTHNG APPARATUS

Spill Release Procedures:EXTINGUISH ALL SPARKS & FLAME. PROVIDE GOOD
VENT. AVOID BRTHNG VAPORS. ALLOW SOLVENT TO EVAPORATE OR COVER
W/EXTINGUISHER FOAM, MFR. SCRAPE UP W/PLASTIC SCRAPER.

Handling and Storage Precautions:STORE IN COOL LOCATION, 60-80F, AWAY
FROM SUNLIGHT & IGNITION, HEAT SOURCES. KEEP CNTNR TIGHTLY CLOSED
WHEN NOT IN USE.
Other Precautions:USE W/ADEQUATE VENT. AVOID SKIN CNTCT & REPEATED
BRTHNG OF VAPOR. USE IN AREA FREE FROM SPARKS & FLAME.

Respiratory Protection:NIOSH/MSHA APPRVD SELF-CNTND BRTHNG APPARATUS IN
POOR VENT
Ventilation:LOCAL EXHST PREFERRED, MECH ACCEPTABLE
Eye Protection:SFTY GLASSES/FACE SHLD
Other Protective Equipment:SAFETY SHOWER/EYEBATH
Supplemental Safety and Health
VAP PRESS 82.7MMHG

Boiling Pt:B.P. Text:171F
Vapor Density:3.05
Spec Gravity:1.004
Evaporation Rate & Reference:2.7, ETHYL ETHER
Solubility in Water:SLIGHT
Appearance and Odor:PEARL COLORED, TRANSPARENT, VISCOUS LIQ
Percent Volatiles by Volume:80

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATLS
Stability Condition to Avoid:HEAT, SPARKS, FLAME
Hazardous Decomposition Products:THERMAL: CO*2, CO, HCL, NITROUS
OXIDES, OTHER TOXIC FUMES

Waste Disposal Methods:DISPOSE IAW LOCAL, STATE, FED REG

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.